How to effectively remove the bicycle tire valve core?

Valve cores are very common in vehicles. In comparison, bicycles have a higher pumping frequency, so they can highlight the role of valve cores. You must have never imagined that small valve cores play a huge role. People have already mastered the skills of pumping up, but many people are often at a loss for the removal of valve cores. Here are a few ways to remove the valve cores.


1. Before removing the valve core, you can drop a few drops of gasoline into the valve nozzle. This is easier to pull out. Be careful not to pull out immediately after the gasoline is dripped. Let the valve nozzle soak in the gasoline for a few minutes. Then use the valve core wrench to gently remove it.


2. Before removing the valve core, you can shake it from side to side twice. When the interior is relatively loose, pull out the valve core forcefully. If it is really difficult to pull, you can use special tools.


3. When the Tire Valves rubber sleeve is aging, it will stick to the valve nozzle. At this time, you need to use fire to burn the outside of the valve nozzle. When the rubber sleeve is scorched by the fire, you can use a metal hard object to knock it. After a few clicks, the burnt rubber sleeve will come off, and the valve core can be easily pulled out at this time.