Although the Tire Valves is small in size, it is directly related to the safe use of the vehicle. Then, if the valve core is used for a long time without maintenance, it will not only reduce the quality of the product, but also shorten its service life. The following will introduce you to the daily maintenance method of the valve core.
Check tightness regularly. People can use oil injection or air compression to test its tightness. If its seal does not meet the requirements of use, it must be replaced with a new valve core in time to prevent problems during use.
Remember not to place it in a dark, damp place. Since the material used in the valve core is rubber, it has certain special requirements for relatively high environmental humidity. If the humidity in the use environment is too high, it is easy to cause aging. Therefore, it is best to place it in a dry and ventilated place.
When the valve core is not used for a long time, an appropriate amount of anti-rust oil should be applied to the metal parts. To ensure that it can give full play to all aspects of performance during use, and can also effectively extend its service life.
Clean up impurities. If there are impurities on the surface of the valve core, it should be cleaned in time. In order to prevent the formation of stubborn stains for a long time, it will directly affect its use effect.
In general, only by properly maintaining the valve core can people ensure the use effect.